Norlab

Your partner in Northern Europe for innovative laboratory instruments

pdf

IDEX MX series II MXT715-105 6-position, 7-port motorized valve
The MXT715-105 is an Ultralife 6-position, 7-port motorized valve. The small compact stand-alone unit is typically used as a selection valve.

IDEX MX series II MXT715-000 2-position, 6-port motorized valve
The MXT715-000 is an Ultralife 2-position, 6-port motorized valve with patented MBB “Make-Before-Break” architecture. The MBB design insures that flow is not interrupted when the injector is switched between "load" and "inject" when a loop is installed between ports 1 and 4. The small compact stand-alone unit is typically used as a switching and/or injection valve.

IDEX MX series II MXP9960-000 2-position, 10-port motorized valve
The MXP9960-000 is a PEEK 2-position, 10-port motorized valve. The small compact stand-alone unit is typically used as a switching and/or injection valve.

IDEX MX series II MXP9900-000 2-position, 6-port motorized valve
The MXP9900-000 is a PEEK 2-position, 6-port motorized valve. The small compact stand-alone unit is typically used as a switching and/or injection valve.

IDEX MX series II MXP7986-000 2-position, 10-port nano-scale switching valve
The MXP7986-000 is a 2-position, 10-port motorized nano-scale switching valve.

IDEX MX series II MXP7970-000 6-position, 7-port selector valve
The MXP7970-000 is a DuraLife II 6-position, 7-port selector valve.

IDEX MX series II MXP7900-000 2-position, 6-port motorized valve
The MXP7900-000 is a DuraLife 2-position, 6-port motorized valve. The small compact stand-alone unit is typically used as a switching and/or injection valve.

Atlantic and Pacific SPE disks selection guide for Horizon 5000 and 3100 systems
This is a selection guide for Biotage Atlantic and Pacific disks to be used with Horizon 5000 and 3100 systems, respectively.

The role of the carbon cartridge in the one-pass system (Horizon 5000)
The one-pass system using the one-pass disk and carbon cartridge is an effective way to extract a large suite of analytes with different characteristics with good recovery. The carbon cartridge can be used to capture additional analytes that are more polar and have large water solubility.

Analysis of extract drying criteria for oil and grease method 1664A/B using Horizon 3100
The evaluation was performed using the Horizon 3100 oil and grease extraction system. The system was set up with the larger disk holder (90 mm). The evaporation step, prior to gravimetric measurement was performed using the Speed-Vap IV automated evaporation system with the 5-position rack and 105 mm aluminum weighing pans.

Pages