pdf

Variable-angle transmittance measurement attachment with polarizer option
Jasco VAT-500i Variable-angle transmittance measurement attachment can be used for difficult applications of samples with reflectance. In this attachment by changing the incident angle of light against the sample surface, the reflected light would not go into interferometer. In fact, this design can drastically reduce the level of noise due to water vapor even the incident angle is changed as small as 10 to 20 degree.

Simple method for quantitative analysis of brominated flame retardants with far-infrared spectrometers
In this application, quantitative analysis results by the calibration curve in far-infrared region were compared with the results in the mid-infrared region in order to confirm the usefulness of analysis by FTIR spectroscopy.

ATR application to granular gum by auto-contact ATR accessory for VIR-100/200/300In this application note, the auto contact ATR has been applied to the monitoring of spectral change by changing of number of contact with sample such as granular gum.

Measurement of trehalose dihydrate by microscope heating methodIn this application, to study the mechanism of bio-protecting functions, bound water in trehalose was measured using a heated FTIR microscope.

Analysis of fish eye in polymer film using FTIR
In this application fish eyes were analyzed using a micro FTIR.